ER20A Type Clamping Nut And Wrench For CNC Milling Collet Chuck Holder Lathe

Description

Description
Condition:
100% Brand New & Hight Quality
Fitment:
for ER collet milling CNC chuck holder.
Specification:
Nut:
Model: ER20A
Material: 40CR
Feature：
Hardened and precision ground.
High strength and hardness.
Durable in use.
Mounting and Removing:
1.Place collet into the clamping nut at an angle and turn the nut slightly to engage with the extractor spiral in collet groove. And then push the collet evenly into the nut in the directions of the arrows.
2.The cutter / router bit may be fitted now and the assemblies tightened hard into the chuck body by using a collet wrench.
3.To remove the cutter / router bit, slacken and undo the nut until resistance is felt. Then, using a collet wrench, further undo the nut until the collet is released from the chuck body. Removal of the collet from the nut is the reverse of the mounting procedure.
Please note:
1、Please don't tighten the nut down before insert the cutter / router bit. Or you will damage the collet.
2、You need to tighten the nut down, but not over-tighten. Or you will damage the collet.
Wrench
Material: 40CR
Type:ER20A
Weight:160g
Wrench Color: Black
Cover Color: Red
Package Include:
1x Clamping Nut
1x Wrench
BBBBD1447
Shipping
Fast shipping from
LA, US.
Shipping available time: Mon. — Fri. exclude holidays.
The orders will be handled in 24 hours after payment got. Ship to Paypal Address ONLY.
Payment
Paypal
,
Visa
, and
MasterCard
are the accepted forms of payment.
Please use the eBay checkout system when paying for your order.
Immediate payment is required for all orders.
Contack
ALL emails would be replied within one business day! We will try our best to save your problem ASAP.
If there's any dissatisfaction, please contact us first so that we can help you.
If there's any suggestion for our service, please contact us. We will much appreciate it and try to improve our service.
Return
Every item is checked carefully before shipping, buy with confidence!
Refund or replacement request is available only requests within a week after parcel received & returning the item as the same condition as received.
Please contact us before you return it, and pls include your eBay ID and brief description of defective problem in your return package.
Who bear the return cost? This will depend on the reason you want to return.
Feedback
We will automatically leave positive feedback to every buyer to complete the transaction.
We maintain high standards pursuit of 100% customer satisfaction! Feedback is very important to us.
Good communication can solve all the problems, if you have any questions, please contact us, we will promptly solve the problems you are experiencing.
Condition:
100% Brand New & Hight Quality
Fitment:
for ER collet milling CNC chuck holder.
Specification:
Nut:
Model: ER20A
Material: 40CR
Feature：
Hardened and precision ground.
High strength and hardness.
Durable in use.
Mounting and Removing:
1.Place collet into the clamping nut at an angle and turn the nut slightly to engage with the extractor spiral in collet groove. And then push the collet evenly into the nut in the directions of the arrows.
2.The cutter / router bit may be fitted now and the assemblies tightened hard into the chuck body by using a collet wrench.
3.To remove the cutter / router bit, slacken and undo the nut until resistance is felt. Then, using a collet wrench, further undo the nut until the collet is released from the chuck body. Removal of the collet from the nut is the reverse of the mounting procedure.
Please note:
1、Please don't tighten the nut down before insert the cutter / router bit. Or you will damage the collet.
2、You need to tighten the nut down, but not over-tighten. Or you will damage the collet.
Wrench
Material: 40CR
Type:ER20A
Weight:160g
Wrench Color: Black
Cover Color: Red
Package Include:
1x Clamping Nut
1x Wrench
BBBBD1447